Dye a mink coat at home. Tips and methods for dyeing fur at home: how to dye a fur coat at home? How to dye fox fur in a light shade

Reading time: 7 minutes

The fur coat already looks worn, but it is still a pity to throw it away. To improve the appearance, you can paint it. With a detailed study of the information, this process will not be difficult. How to dye fur, what you need for this, how to prepare, is described below.

Before painting the product must be prepared. How can you clean the fur:

a teaspoon of dishware;
2 teaspoons of salt;
10 g of soda;
5 g ammonia;
liter of water.

From the components make a homogeneous liquid. Clothes are hung on hangers or placed on the table. Spread the cleanser with a brush, leave for a few minutes. Rinse with running water so that it does not get on the bottom.

What else is suitable for cleaning:

mix water, vinegar, alcohol in equal proportions;
distribute over the product, rinse.

After that, the thing is dried on the street or in a ventilated room. You can not hang next to the stove, battery.

These methods are suitable for cleaning mink, rabbit, silver fox, arctic fox - any natural fur.

Cleaning is necessary for uniform application of paint. Dirt, dust will not allow this to be done.

The leather part of the clothing is treated with ordinary hand cream. It won't dry out, it won't crack.

Fur varieties

Useful tips for coloring fur depending on the type:

White wool is the easiest to dye. Chinchilla, rabbit coat is easy to dye. Do this carefully so as not to damage the delicate fur. If the white villi turn yellow, they are lightened with hydrogen peroxide. Then any color will lie flat.
The hairs of the arctic fox are dense, they will take a lot of time, paint. The fox is easier to work with, the paint lays down easily, the color remains for a long time.
Dyeing a mink coat is not easy. She is difficult to color.

A thing from a nutria is easier to color than a mink one. It is similar to mink, but lighter. She has three types of hair in thickness and length, so the fur is adjacent.
The dyed muskrat is pinkish with white spots. After a short time, it fades.
The hair of a sheared beaver cannot be lightened beautifully. She will turn yellow. It is worth using darker paints on the original color.
It is not easy to paint a muton fur coat due to its high density. It is necessary to carefully distribute the dye, carefully monitor the uniformity of application. Otherwise, there will be stains.
When dyeing silver fox wool, a new color is usually given to the longest villi.

Hair dye must not be applied to faux fur. Aggressive substances will ruin it.

Do not paint a new product, this will shorten its service life. Only an old, worn thing is subject to this process in order to serve its owner a little more.

Before painting, check the readiness of the skin. Rip off a little of the lining and moisten the skin with plenty of water. If you pull hard, and it breaks, then you can’t paint, otherwise the finished thing will fall apart into pieces. If it stretches, painting is allowed.

Where they paint

Where can I dye a fur coat or fur thing:

In a studio specializing in fur processing. There they will repair and paint.
Some dry cleaners have a fur dyeing service.
The factories paint, but usually in large batches. If you wish, you can find a company to dye your fur coat.
At home, it is easy to do it yourself.

Coloring process

hair dye;
tint shampoo / balm;
spray paint for suede;
spray dyes for fur;
clarifier.

Bleaching agents injure the hairs. The fur coat after clarification will last less than originally planned. It is worth considering whether drastic changes are needed or whether it is worth painting a darker color.

Applying hair dye

Animal hair and human hair are similar in structure. This tool is ideal for dyeing fur. Before use, it is worth checking the action on a small inconspicuous area of \u200b\u200bthe thing. If necessary, first remove the yellowness from the clothes. After that, start painting. A quality ammonia paint is recommended.

How to use hair dye correctly:

Put on gloves. Dilute the product according to the instructions.
Apply to the product with uniform, quick movements. Rubbed all over the fur - spots should not remain. Movements must be careful so that the hairs do not break.

After staining, the skin is again smeared with cream. The thing is blotted with a towel, dried. So that the clothes do not sit down, they are pinned with pins to a hard surface with the fur up.

For painting in black, one procedure is not enough. This is done 2-3 times.

You should not do complex dyeing, highlighting wool on your own. Such work should be entrusted to professionals. If you have experience in dyeing hair in this way, you can try:

apply paint to the ends;
wrap with foil, leave for the required time;
rinse gently.

If you dye a natural fur coat at home correctly, it will last a long time. The color will start to fade after 7-9 months. After this time, it is recommended to update the color.

Spray can

The suede agent is suitable for dyeing part of the product. The ends of the fox fur may turn yellow over time. How to paint fur with a spray can:

spray at a distance of 70 cm from the thing;
move the spray all the time so as not to glue the hairs;
comb through after spraying, then they will not stick together.

There is a special paint for natural fur in the form of an aerosol. A small area is painted with it, for example, a fur collar. This part should not come into contact with the bag, constant interaction will leave a mark. How to do:

sprinkle the desired area on a jacket or fur coat;
massage for distribution;
dry naturally.

Spray will not work to paint in a different color radically. You can enhance the shade, make it more saturated and deep.

Other options

You can recolor fur things in the following ways:

A yellowed mink hat is lightened with the following composition: combine a couple of tablespoons of hydrogen peroxide and 10 drops of ammonia. Moisten the ends of the villi so that the liquid does not get on the skin.
Paint a red fur coat with a manganese solution. It must be concentrated. Apply the solution with a new dish sponge and make sure that the skin does not get wet.
Toning with a tinted shampoo will help make the color deeper, richer. This is true if earlier a fur coat, hat or vest was dyed with hair dye. The tint maintains the color to push back the time of the next hair dye.

To soften an old fur coat and give it shine, you should use a hair balm. This is done after staining or mixed with a tint. Finish staining by rinsing in vinegar solution.
Rabbit fur is dyed at home only in extreme cases with delicate dyes. It is very soft and thin.
Fur inserts on the coat are dyed carefully so as not to stain the base material. If the fabric allows it, sew a piece of fabric on the main part in a few stitches. You can wrap a piece of unnecessary fabric, secure it with a pin.

How to dye faux fur with your own hands:

remove dirt and dust with a cotton pad with shampoo, rinse with water;
to update the color, use a tinting shampoo;
use dye for faux fur, but not for hair;
to evenly distribute the color, the thing is pulled, fixed;
brush along the fibers, not missing the fabric;
after the required time has elapsed, they are washed, the fur is combed, left to dry.

How to care

Proper care to preserve color, novelty:

sometimes comb the hairs with a special brush;
dry clothes if it is snowing outside;
timely clean contaminated, worn areas;
before putting away for storage, get rid of stains, dust;
put on a cover for storage after winter.

Dyeing a fur product is not difficult if you approach the process correctly and follow all the instructions. If the thing is badly damaged, you need to dye the entire fur coat or there is a fear that it will not work out, it is better to contact the atelier.

In the process of long-term wear, a fur product may lose its attractiveness only due to the fact that the fur has faded either from the sun or from exposure to precipitation. In this case, there are two ways to restore. Specialized companies that provide dry cleaning and painting services are able to do it efficiently. But you can give a “second life” to your favorite thing at home. Following the instructions and applying a share of your own imagination, you will be able to create a unique work of art.

If the age of the fur product is indicated by its color, then you can update the appearance with the help of painting.

For gray astrakhan, only black or brown is used. The mink is dyed in native colors in order to restore faded shades. Mouton products are suitable for black or brown pigment. Fur things in beige tones are dyed in all shades of brown to enhance the intensity of the native color. Choose a paint one or two shades darker for work.

The main condition for high-quality and uniform dyeing is clean fur. The best cleaning agent proved to be an alkaline solution, its composition is as follows:

soda (dessert spoon);
salt (dessert spoon);
ammonia (a teaspoon);
about 15 drops of detergent
1 liter of water.

Lightening yellowed white fur is an additional element of color restoration. To do this, use a solution with hydrogen peroxide (a teaspoon) and ammonia (10 drops). This tool can remove yellowness from silver fox fur. In the process of processing with such a composition, deep soaking should be avoided. First, a test is made on an inconspicuous area of \u200b\u200bthe product. 15 minutes is enough for lightening. It must be remembered that A longer process will make the tips brittle.

Chalk and starch help to remove yellowness on the fur of a gray rabbit for a while. The powder is evenly and with little effort rubbed over the top of the pile and shaken off. This method will not harm the product, so you can use it often. Gray rabbit fur is dyed with hair pigment. There is also an absolutely safe method, in which an aqueous solution of blue is gently applied to the entire surface of the product with a brush. The composition should be light blue.

To ennoble faded raccoon fur, hair dye is used with a brightening effect, as a result of which the product will look gold or silver plated.

You can update the fox fur with thick potassium permanganate. Treat it gently with a sponge, not allowing things to get wet.

The faded ends of the fur are dyed with suede spray paint. Spray the product slowly, keeping a distance of about 70 centimeters between the fur coat and the sprayer.

How to dye fur with hair dye?

For dyeing polar fox or mink on your own, hair dyes are suitable. This method has been tested in practice and always gives positive results when painting not too old things. It is better to check the effect of even high-quality products on a small inconspicuous area of \u200b\u200bthe product.

To dye fur at home, you will need to follow these steps:

Straightening the strands of natural fur, apply a thin layer of oily cream or glycerin to the mezra.
Gently moisturize the entire fur surface.
Apply the product as carefully as when coloring hair.
Leave for a while. Duration of staining - according to the instructions on the package with the dye.
To enhance the effect of the paint, a saline solution is evenly applied to the entire surface.
Wash off the paint under the stream of water from the shower.
Excess is removed with a rag or blotting paper.

After drying, the fur is combed, observing the natural direction of the pile. Such paint lasts up to six months on a fur product, and this is often enough to make the thing look updated.

A simplified version of tone saturation is coloring with tinting shampoo (in accordance with the instructions on the package).

For coloring with multi-colored paints, home-made stencils are used. The spots are painted alternately.

Faux fur is easier to dye. You can use toning shampoo and hair dye. The sequence of actions is as follows:

Before staining, the product is fixed.
Apply the agent in the direction of the fibers.
Leave the paint to soak in. The time must match the instructions in the instructions.
After the procedure, the fur is washed, dried and combed.

Experts do not recommend experimenting with staining new things.

Home or professional dyeing extends the life of the fur product for a short time. After some time, the pigment comes off, and the thing becomes faded again.

Have you ever thought about how to dye fur at home. But surely every modern fashionista has a vest, a sheepskin coat or a fur coat made of natural or faux fur in her wardrobe. During operation, the fur can change its original appearance, burn out in the sun, or maybe you will come up with the idea of changing the appearance of an old little thing. Today, service organizations, represented in sufficient numbers, provide a full range of fur dyeing services, but, unfortunately, at an impressive cost, they do not always meet the expectations of customers. That is why the question of how to dye fur at home, whether it is possible, in general, to carry out this procedure on your own, is very common today. We will talk about it in the framework of this material.

Preparatory activities

The success of the "operation" largely depends on how well the preparatory measures will be carried out. Having decided to update the shade of the fur or radically change it, do not forget to clean it, because the dirt prevents the deep penetration of the dye, respectively, the result of dyeing affects.

For cleaning, you will need an alkaline solution made from a liter of water, 2 teaspoons of soda, 1 teaspoon of any dishwashing detergent and 1 teaspoon of ammonia, which can be purchased at the nearest pharmacy. All components must be thoroughly mixed with each other until a homogeneous mass is obtained. On the mezdra (bottom layer of the skin), to prevent drying out, apply a greasy cream, for example, for children. Then, armed with a brush with hard bristles, you should apply an alkaline solution to the fur, spreading it over the entire surface, then rinse the product thoroughly under running water and lay it in a horizontal position to dry.

What to paint?

If you do not know how to dye fur at home, what means to use for this, you have come to the right place. To date, there are enough professional paints and compositions in specialized stores, but hair dye is still no less effective and affordable. You can find it in any supermarket at an affordable price, and the variety of shades allows you to satisfy the taste preferences of every fashionista.

So, for dyeing, you will need paint, a brush with which you will apply the composition to the fur and, of course, rubber gloves - an indispensable means of protection. When choosing a brush, give preference to the option with hard bristles.

fox fur

How to dye fox fur at home? Luxurious vests made of fox skins have been a trend of the last few years. They will be relevant in the near future, which is why the owners of such luxury need to properly care for it: update the shade of fur every season, clean it. In addition, modern dyes allow, if necessary, to radically change the color of the fur product. So why not take advantage of this opportunity?

Deciding on a shade

If you do not know how to dye natural fur at home, in particular fox fur, it is important to get acquainted with some of the nuances of the procedure. They are primarily associated with the structural features of the fur. Of course, the choice of shade lies on the shoulders of the owner of the fur product, but professionals strongly recommend dyeing the fox fur in dark shades. If, on the contrary, you want to lighten the product, you will have to pre-treat the fur with hydrogen peroxide.

Let's start coloring

For maximum results, wet the fox fur with water, and then proceed to apply the coloring composition, paying attention to each area. After the entire composition has been applied, it is necessary to withstand the time indicated on the package. After that, it is enough to rinse the product under running water and dry it, placing it in a natural horizontal position.

Mink

Mink hair is identical in structure to human hair, which is why the choice of dye for mink should be approached more demandingly. The same hair dye is perfect, but it is better to give preference to a professional series that will give the most natural natural shade, and it will last much longer than budget counterparts. But some recommend using spray paint. In this case, it is necessary to apply paint from a distance of 60-70 cm in several layers. Do not be afraid to layer paint - this technology will allow you to achieve an expressive and deep noble shade.

If you are looking for an answer to the question of how to dye mink fur at home, use the general rules that work with any fur. In everything, the dyeing procedure completely repeats the procedure for transforming fox fur, described above.

Mouton fur

This once most popular type of fur is still relevant today. Its popularity is largely due to the warmth and comfort that a product made of mouton fur gives. But not everyone knows how to properly care for the fur, which is why, with time of operation, there is a need for additional dyeing.

Mouton products are rightfully one of the most unpretentious, but speaking of staining, you should be patient, be extremely careful and accurate. Since how to paint fur at home with paint in the case of a muton. The pile of such fur is quite thick, dense, which is why it is so important to evenly distribute the coloring composition over the entire surface.

And one more thing: before dyeing, test a small amount of pigment on a small section of the fur product - in case of spots and bald spots, it is better to abandon the idea of \u200b\u200bself-dyeing and entrust it to professionals.

Artificial fur

Do you think only natural fur causes admiration and admiring glances of others? For several years, faux fur products: bright, sometimes extravagant and quite affordable models, have turned the whole idea of fashion, beauty and luxury upside down. If you have a jacket or bag in this material in your wardrobe, update them with dyeing. Want to know how to dye faux fur at home? We will tell you about it.

The same hair dye is suitable for dyeing - in the case of faux fur, you can experiment, give preference to brighter, more acidic shades. For preliminary preparation, an ordinary soap solution is suitable, which is applied with a sponge over the entire surface of the product.

In order to get the perfect result, before painting, do not just lay the product in a horizontal position, but also stretch it well. This will help avoid the formation of bald spots.

Summing up

We tried to figure out how to dye fur at home, and gave some of the most effective ways. With the proper approach to the procedure, the use of high-quality materials and tools, you can achieve amazing results. In addition, dyeing fur, both natural and artificial, at home will not take you much time and, most importantly, money. We hope that you will appreciate the information provided and be sure to use our advice and recommendations.

It happens that with the onset of cold weather, you take your favorite white down jacket out of the closet and see that it is no longer worth wearing it ... The down jacket itself is intact - intact, but white fox collar has acquired an unpleasant yellow tint. With a sigh, you take off your collar and decide that over time you will have to buy a new thing, but for now you will wear it without a great addition in the past - fox trim. But do not rush to throw the collar in the trash or cut into fur patches. The situation can be easily corrected.

At home, the fur collar can be dyed with regular hair dye. And this procedure does not require much effort from you.
In this article, we provide step-by-step instructions for painting fur.

1. In order for the dye to freely penetrate the structure of the fur, it is necessary before dyeing degrease and clean from dirt.
To do this, you need to prepare a special solution. We take:
- table salt - 3 teaspoons;
- ammonia - 1 teaspoon;
- any liquid detergent or pet shampoo - 1 teaspoon;
- baking soda - 2 teaspoons;
- water - 1 liter.
We process the fur with a solution with a brush. Then it should be thoroughly washed and dried.

2. It is advisable to protect the core, the lint-free side of the collar, from drying out before painting. To do this, it is lubricated with glycerin or any nourishing cream. Otherwise, your collar is more likely to tear.

3. The best option - dye the fur a tone darker than he was before. But if your paint contains bleaching agents, then you can achieve the original color. Since fox fur is much thicker than the hair on a human head, we recommend stocking up with more than one tube of paint.

4. Now you can start for coloring the collar. We use the paint according to the instructions. In order for the coloring matter to be evenly distributed, it is better to moisten the fur with water beforehand. Work with gloves, apply the paint quickly, spread it over the fur with your hands - the main hair and downs should be thoroughly smeared.

5. At the end of the dyeing time, the fur is washed with plenty of water. After that, rinse the collar in a solution of vinegar. To rinse and add shine and volume to the fur, you can use hair conditioner instead of vinegar.

6. When our collar is rinsed, dry it gently with a towel.

7. In order for the collar not to shrink after dyeing, it must be dried on a flat surface, straightened well, stretched and pinned to the surface with needles. The collar should be dried with the fur facing up. The inside will take the longest to dry, so before removing the fixing needles, make sure that the collar is dry on the inside side.

How to clean silver at home
Many women prefer silver jewelry because this meta...

How to clean gold at home with improvised means
Everyone loves gold jewelry, and women are just crazy about them. And u...

How to clean suede at home
Suede is a very demanding material, so it requires a certain...

How to clean the carpet at home folk remedies
In our world of new technologies, we are already accustomed to all kinds of services....

Light in the house - create comfort with the help of lighting
Do we always know the reason for our bad mood or fatigue? By...

Natural and artificial fur are very beautiful materials intended for tailoring exclusive clothes. Unfortunately, despite the high cost, they are prone to fading from ultraviolet radiation. Precipitation spoils them, other adverse factors, as a result, the brightness of products decreases.

To prevent a fur coat or hat from looking shabby, you need to learn how to dye fur at home, and use one of the methods.

Artificial material is much cheaper, less susceptible to adverse external influences, although it can also deteriorate and take on a worn look. You can also paint it, but not every tool is suitable. With the wrong selection of paint, hairs will come out, the material will shed heavily without the possibility of recovery.

Where to start painting

Before starting work, you need to carefully inspect the product. If it has traces of moth activity, other mechanical damage, “bald patches”, staining will not save the situation. It is better to take the thing to the studio, where they can give it a second life. The fur needs to be combed, cleaned of debris, dust, all impurities, so that the paint is light as evenly as possible. Next, you should choose the appropriate option for working with fur products.

How to dye fur: artificial and natural

Experts advise using for this purpose professional compositions designed specifically for dyeing fur skins. Such products are especially recommended if the hairs are thick and long. You can use hair dye, but you have to buy several packs, which can be quite expensive. There is an option to cover fur products with aerosol, which is sold in hardware and shoe stores. Such a tool can only refresh the ends of the fur. It is not possible to paint over the entire thickness of the material with an aerosol. For full coloring, you will have to buy a special tool or hair dye.

Before work, it is necessary to carry out a test for the degree of aggressive effect of the paint:

dilute a small amount of the product (if it is powder);
lubricate the material in an inconspicuous area;
withstand the time specified by the instruction;
wash off the paint;
assess the condition of the material;
start full dyeing, if the fur has retained its quality, has not changed its structure within 2 days.

When you want to make fur 1-3 tones lighter, you can use not paint, but clarifier. The most commonly used means are "Supra", "Blond" based on ammonia. It is better to paint artificial products only with specialized compounds with a note about this possibility. Hair dye will immediately ruin this material, so it's not worth the risk.

Coloring with paint for curls

In its structure, fur resembles human hair, so its color can be completely changed with a tool familiar to every woman - hair dye. Similar products are sold in any supermarket, household chemicals store, and the choice in terms of prices and shades is very diverse. When buying, you should consider the following mandatory requirements for paint:

durability (usually acquire means that can paint over gray hair);
the tone is at least one shade darker than the color of the hairs;
gentle composition, no caustic substances.

If you want to lighten dark material, you first have to discolor it with the appropriate paint. Next, re-staining in the desired shade. It happens that white fur turns yellow from long wear. It will also have to be discolored before staining, otherwise the yellowness will distort the selected shade. For fox fur, you need to purchase more paint than for mink, rabbit. For a long fur coat, up to 5-6 packs of paint may be required.

Spray for dyeing fur

If the tips of thick fur are burnt out in the sun, it is not necessary to carry out its full coloring. Sometimes it is enough just to paint the discolored part, and the thing will shine like new. To update the fur, you need to purchase a spray for suede in a bottle, but you should not save on its quality. A low-quality product can stain hands, things, and human skin for a long time.

Using spray paint is very easy. You need to hang a fur product on a hanger on a balcony, terrace, or cover all surrounding surfaces with cellophane. Then spray paint from a distance of 40-50 cm, working through each area. After finishing work, you need to comb the fur, let it dry well. For drying it is permissible to use a hair dryer. Usually the result is enough for one season, then the thing will need to be painted again.

Selection of shades for different colors of fur

Coloring without preliminary discoloration should always be carried out in a tone darker than the original one. For example, to update the classic brown mink fur, you need to buy a dark brown dye. If the fur is new, has not been worn, has not burned out at all, it will be difficult to paint over it, since the pigments do not fit well on such material. You will have to add not only more funds, but also take a darker shade. This is easy to do: you need to pour a little black into the brown paint.

Gray and blue mink are usually dyed the same color, choosing the appropriate tone for the hair. The material will not change the shade, but it will become brighter, more saturated. Long-haired fur should also be dyed in a tone close to natural, because for high-quality dyeing of hairs, you will have to make a lot of effort and buy several packages of the product.

What is needed for work

Before starting the process, you need to prepare water, hair dye or a specialized product, a bleach preparation (if necessary). Also, to wash the fur, you will need soda, ammonia, salt, and a mild detergent.

Stages of dyeing fur

To get a good, lasting result, you need to consistently follow all the steps and do the work carefully.

Preparing the item for painting

During wear, the thing became very dirty, began to shine, particles of fat settled on it. It is impossible to wash fur products with the usual method: they will immediately deteriorate in the typewriter. Therefore, for cleaning and subsequent uniform laying of the paint, it is necessary to carry out a special treatment with an alkaline solution.

Fur cleaning

To clean the material, you need to prepare a solution from:

2 liters of water;
2 tablespoons of soda;
2 tablespoons of salt;
a tablespoon of dish detergent;
3 drops of ammonia.

All components must be diluted with water, shake the solution well. Hang the product on a hanger. Lubricate the skin (skin) with glycerin, after opening the lining. You can skip this step if you manage not to wet the skin. Otherwise, it may crack or shrink after drying.

Comb the fur, use a clean sponge to process the prepared product. Thick wool should be moistened with a brush, evenly distributing the liquid over the surface and carefully grabbing the undercoat. After 10 minutes, wash off the solution with clean water, being careful not to wet the skin. Then dry the product well in the open air, in a ventilated area. You can’t hang it near the battery, you can’t stove!

In addition to this recipe, there are a number of products that are suitable for cleaning fur:

equal parts of 4% vinegar, water, alcohol;
animal shampoo solution;
professional cleansing spray (Furasol or other).
Color fixing
To fix the color, a solution is prepared: 5 tablespoons of table vinegar (9%) are diluted in two liters of water. After the product is sprayed with a fur product. If the dyeing was carried out with hair dye, you can apply the attached balm to the fur. This will make the product incredibly soft, silky. The balm is applied as on the hair, washed off after 5 minutes, and only then the pigment is fixed with vinegar.
Drying
When all work is completed, the fur must be dried. To do this, the thing is placed on strong wide coat hangers, which should fit well in size. It is advisable not to take metal coat hangers (wooden ones are ideal). The product must be brought into a warm room, but placed away from heating appliances, and allowed to dry. Before complete drying, you can apply a little glycerin to the fur and comb it, setting the desired direction to the pile. Usually drying takes 2-5 days depending on the type of fur and the size of the product.

Fur care after dyeing
Over time, the hairs of old fur can become stiff, fade even after dyeing. To fix the problem, you can periodically rinse the product with hair balm. It is better to take the tool that comes with the paint (you can buy inexpensive paint and pull out the balm). Sprinkling things with a solution of vinegar 9% (a spoonful in a glass of water) will also add shine. The effect of painting in any case will be temporary. Once a season it is worth tinting a thing so that it does not lose its gloss and always looks attractive!